How Steel Castings Should Be Machined

There are many things that need to be paid attention to in the process of processing steel castings, if you don't pay attention to them, it will directly affect the quality of castings, and at the same time, it will also delay the normal delivery in the later stage. So how should steel castings be processed?

1. When processing, steel casting manufacturers need to find the middle part of the steel casting to ensure that the different sides of the steel casting have a suitable processing amount.

2. The processing method of steel castings is generally divided into two kinds, one is rough machining, one is finishing, steel casting manufacturers can choose according to the requirements of users, and manufacturers need to pay attention to leaving a certain margin on one side when rough machining.

3. If the bottom of the steel casting needs to be processed, it should be processed as little as possible, as long as the light can be seen, and if there is no defect at the bottom, it can be directly processed in place at one time, and if there is a margin of about a few millimeters, it needs to be renovated and finished.

4. The outer circle, height and size of finishing need to be controlled according to the deviation of the quantity, if there is a defect in the casting, it can be welded and repaired and then finished.

5. If there is an appearance defect in the production process, it is necessary to repair the appearance of the steel casting. Generally, arc welding or other tools can be used for grinding, which can not only effectively reduce the loss of the process, but also keep the casting neat and smooth.

Therefore, in order to ensure the use of steel casting products, the purchasing manufacturer must choose a steel casting manufacturer with high qualifications and professional casting equipment when choosing a casting manufacturer, so as to fully ensure the performance and quality of steel castings in the subsequent use process.